Cabriolet V6-2.8L (AFC) (1995)
-
Place new seal on special tool VW431 with sealing lip pointing toward tool.
-
Install special tool VW431 with seal in rotary valve housing.
-
Place special tool VW421 onto special tool VW431 and drive seal in fully.
-
Fill space between sealing lip and dust lip with multi-purpose grease.
-
Insert assembled bushing (protective sleeve (2 in illustration) and installation sleeve (3 in illustration), included in repair kit) into seal.
-
Press installation sleeve (3 in illustration) out of protective sleeve.
STEERING RACK, INSTALLING
NOTE:
^
Before installing steering rack, wash out steering gear housing with solvent and blow dry with compressed air.
^
Clean steering rack
^
Before installing, coat installation sleeve components, steering rack and steering rack seals with hydraulic oil.
^
All new repair kits include an installation sleeve.