Cabriolet V6-2.8L (AFC) (1995)
NOTE: Turn tube 3301/4 so that the large opening lies on the control arm mounting bracket
WARNING: The force needed to remove the bushing can cause it and the tool to spring out of the subframe suddenly (risk of injury).
Fig. 2 Pressing in front subframe bushing
-
Before assembly, apply lubricant G 294 421 A1.
-
Press in front subframe bushing up to stop.
NOTE: Larger collar of thrust piece 3301/2 faces bushing.
Fig. 3 Pressing out rear subframe bushing
NOTE: Turn tube 3301/3 so that the larger opening lies on the control arm mounting bracket
WARNING: The force needed to remove the bushing can cause it and the tool to spring out of the subframe suddenly (risk of injury).
Fig. 4 Pressing in rear subframe bushing
-
Before assembly, apply lubricant G 294 421 A1.
-
Press in rear subframe bushing up to stop.
NOTE: Smaller collar of thrust piece 3301/2 faces bushing.