Axle Beam: Specifications
- Make
- Audi
- Model
- Cabriolet
- Engine
- V6-2.8L (AFC)
- Year
- 1995
- Section
- Suspension › Axle Beam › Specifications
Steering and SuspensionSpecifications
/Page-1773001.png)
Axle Beam: Specifications
TIGHTENING SPECIFICATIONS
Axle Beam To Bracket Nut ...................................................................................................................................... 80 Nm (59 ft lb) + 1/4-turn (90°)
NOTE: When tightening axle beam nut, vehicle must be standing on ground
Bracket To Body Ribbed Bolt ......................................................................................................................................................... 150 Nm (111 ft lb)
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1995 Audi Cabriolet 2.8L
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Audi Cabriolet 1995 2.8L shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.