Coupe GT L5-2226cc 2.22L SOHC (KX) (1986)
Trip Computer: Technical Service Bulletins
Fuel Range, Coolant Temperature, CIS-E Signal, RPM and Fuel Mileage Sender Checks
Fuel range display sender, checking
Note
If fuel tank contents are not the same as displayed quantity, display can be adjusted with screw in side of instrument cluster
-
disconnect 35-point connector from instrument cluster (not illustrated)
FUEL RANGE DISPLAY SENDER
-
connect US 1119 between contact 24 and ground
-
measure resistance
^
380.0 ohm - tank empty
^
40.0 ohm - tank full
If specified values are not obtained, - repair break in wiring according to wiring diagram OR
-
replace defective fuel range display sender
If specified values are still not obtained, - replace instrument cluster
Coolant temperature display sender, checking
COOLANT TEMPERATURE DISPLAY SENDER
-
disconnect 35-point connector from instrument cluster
-
connect US 1119 between contact 26 and ground
-
measure resistance when eng. temp. resistance
is approx.:
is approx.:
20~C ( 68~F)
1000 ohm
40~C (104~F)
500 ohm
60~C (140~F)
180-200 ohm
90~C (194~F)
75-100 ohm
110~C (230~F)
45-60 ohm
120~C (248~F)
35-45 ohm