Q5 Quattro V6-3.2L (CALB) (2009)
Tail Light Bulb: Service and Repair
Inner Tail Lamp Bulb Holder
Inner Tail Lamp Bulb Holder
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Insert a screwdriver - 2 - into the opening and pry out the cap - 1 - from the inside in - direction of arrow -.
-
Turn the socket - 1 - counterclockwise.
-
Remove socket from rear lamp housing.
-
Remove bulb from socket.
Installing
Install in reverse order of removal, observing the following:
-
Insert new bulb into socket, do not touch glass cone with bare hands when doing so.
-
Secure socket by turning clockwise.