Q7 Quattro V6-3.6L (BHK) (2007)
Brake Caliper: Removal and Replacement
Rear Brakes, Servicing
Rear brakes, Brembo brake caliper 17" and 18", servicing
Note:
^
After replacing brake pads, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
^
Use brake tiller bleeder unit VAS 5234 or extraction device V.A.G. 186914 to extract brake fluid from brake fluid reservoir.
^
Before removing brake caliper or disconnecting brake hose, brake pedal actuator V.A.G. 186912 must be inserted (this dissipates pressure).
Assembly overview
1 -
Brake disc/brake drum
^
Brake drum: diameter and wear limit
^
Must always be replaced together on both sides of axle
^
Brake disc/brake drum not directional
^
Remove brake caliper before removing
2 -
Fitting bolt
^
Torque specification 14 Nm
^
Brake disc to wheel bearing housing
3 -
Screw plug
^
Torque specification 14 Nm
^
For adjustment nut of parking brake
4 -
Brake caliper
^
Do not unscrew brake line when replacing brake disc
5 -
Socket head bolt
^
Torque specification 180 Nm
^
Always replace after removal