Q7 Quattro V8-4.2L (BAR) (2008)
-
Use small screwdriver to carefully release fasteners - A arrows - on trim side.
-
Release catches on armrest side by pressing retaining element in - direction of arrow B -.
-
Pull Power Window Control Head (in drivers door) E512 - item 1 - down out of switch mount.
Installing
Install in reverse order of removal, observing the following:
-
Press Power Window Control Head (in drivers door) E512 into switch mount until catches engage.
-
Guide switch mount into armrest.
-
Install armrest.
-
Install air channel.
-
Install front door trim.