Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove bolts - 1 - (Qty. 2).
-
Remove the upper instrument panel cover (knee bar) on the driver side - 2 -.
Installing
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Make sure the clips - 1 - (quantity 5) are not damaged and that they are positioned correctly.
-
Replace an damaged or missing clips - 1 -.
Installation position
-
Pay attention to the installation position of the clips - 1 -.
-
Install the clips - 1 - into the instrument panel - 2 - so that the hook-shaped part of the clip - arrow - is at the top.