RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3317001.png)
Trim Panel: Service and Repair
Sill Panel Trim, Removing and Installing
Sill Panel Trim, Removing and Installing
Removing
-
Unclip side trim - 1 - in bottom area.
-
Unclip sill panel trim - 2 - at clips - 3 - (3x).
-
Remove sill panel trim - 2 -.
Installing
-
After installation ensure that seal is pulled correctly over sill panel trim - 2 -.
-
Install sill panel trim - 2 - in reverse order of removal.
