RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-3305001.png)
Trim Panel: Service and Repair
Rear Lid Trim
Rear Lid Trim
Removal
-
Remove the warning triangle, if equipped.
-
Remove bolts - 6 - (Qty. 2).
-
Remove the warning triangle bracket - 9 -, if equipped.
-
Pull off lock cover - 5 -.
-
Remove the screw - 8 - in the handle - 7 -.
-
Vehicles with emergency release: remove the emergency release handle- 2 -.
-
Unclip the rear lid trim - 1 - at the clips - 7 - (1Qty. 2).
-
Remove the rear lid trim - 1 -.
Installing
To install, perform the steps used in removal in reverse order.
