RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Convertible Top Deck Lid: Service and Repair
Variable Convertible Top Compartment, Removing and Installing
Variable Convertible Top Compartment, Removing and Installing
1
-
Variable convertible top compartment
Removing
-
Move convertible top into such a position that convertible top compartment is open.
-
Lift up side lining in convertible top compartment.
-
Remove bolts left and right - 2 - (2x).
-
Close convertible top.
-
Open luggage compartment lid.
-
Remove lid of convertible top compartment.
-
Remove handle mount trim.
-
Detach Bowden cables from clips.
-
Using a large, flat screwdriver - 6 -, work along between convertible top compartment side section - 4 - and console - 3 - and carefully
detach convertible top compartment from console - 5 - (secured with adhesive tape)
-
Disconnect connector to microswitch - 7 - on right side.
-
Detach Bowden cables from clips.
-
Close luggage compartment lid.
-
Move convertible top back into position "Convertible top compartment open".
-
Second mechanic is required to lift out.
-
Position handle mount trim on variable convertible top compartment.
-
Remove luggage compartment side trim on left.
NOTE:
-
The variable convertible top compartment must be lifted at sides of frame section, do not hold convertible top compartment in center
and extend mechanism.
-
Lift out variable convertible top compartment - 1 - at both sides on side sections - 4 -.
-
Make sure Bowden cables do not catch.
2
-
Bolts (2x)