RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1707002.png)
-
Unclip the parking brake cables - 3 - from the retainer - 1 -.
Before installing the new parking brake cables you must remove the parking brake lever and reset the mechanism.
Removing and installing the parking brake lever. Refer to => [ Parking Brake Handle ] See: Parking Brake Lever/Service and Repair/Parking Brake
Handle.
Installing
-
Clip on the parking brake cable until it engages.
‹› The cable - 1 - must lie under cable - 2 - at cross point.
