RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove right front exhaust pipe/exhaust manifold nuts - arrows -.
-
Remove front exhaust pipe with pre- and main catalytic converters.
Installing
Installation is in reverse order of removal, note the following:
NOTE:
-
Replace self-locking nuts.
-
During installation, re-install all heat insulation sleeves and heat shields at the same locations.
-
During installation, all cable ties must be re-installed at the same location.
-
Tighten front exhaust pipe/exhaust manifold threaded connection nuts - arrows - evenly in stages while aligning main catalytic converter
horizontally.
-
Install subframe with cross member.
NOTE: Individual mounting components of exhaust system on transmission
-
Align exhaust system free of tension.
Torque specifications