RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1459001.png)
Pressure Plate: Removal and Replacement
Clutch With SAC Pressure Plate, Removing and Installing
Clutch with SAC pressure plate, removing and installing - 6 Spd. Manual Transmission 0A3 All Wheel Drive
Special tools, testers and auxiliary items required
^
Counterhold tool 10-201
^
Centering mandrel 3176
^
Grease for clutch plate splines G000100
Removing
-
Attach counter-hold tool 10-201 before loosening bolts.
To prevent the pressure plate from becoming distorted during removal (causes clutch grab when driving off), always adhere to the following
procedure when unbolting the pressure plate:
-
Loosen all 6 bolts consecutively in clockwise direction and in steps of 90 degrees (1/4 turn) until the pressure plate is released.
Installing
Note:
