RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1575003.png)
‹› Left and right tapered roller bearing inner races are pressed off with the same tools.
CAUTION!
Wear protective gloves!
-
Heat inner race to approximately 100 °C, fit in position and press in.
Left tapered roller bearing outer race, removing from final drive cover
A Support, e.g. ( Kukko 22/2)
B Internal puller 56 to 70 mm, e.g. (Kukko 21/8)
-
After removing, check shims for damage.
Left tapered roller bearing outer race, pressing into final drive cover
