RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Differential: Removal and Replacement
Differential
Differential
Special tools, testers and auxiliary items required
‹› Drift (VW 295)
‹› Driver (2062)
‹› Puller (T10037)
‹› Sealing grease (G 052 128 A1)
‹› Removal and installation is also possible with transmission installed.
‹› Differential can be removed and installed without removing shifter, input shaft, drive pinion/hollow shaft and transmission cover. The removal of
the above mentioned parts is necessary when the differential must be adjusted.
‹› Adjustments are required when replacing components marked with 1). List of adjustments, refer to => [ Adjustment Overview ] See:
Adjustments/Adjustment Overview.
1
Transmission housing 1)
2
Seal
‹› Removing, refer to => [ Flange Shaft Sealing Ring, Removing ]