RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
-
Removal
-
Remove seat.
-
Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
-
Attach the front seat to the fixture for seat repair VAS 6136.
-
Remove bolts - 2 - (2x).
-
Turn control module - 1 - around.
-
Disengage retaining bracket - 4 - and disconnect connector - 5 -.
-
Press in catches - 3 - (2x) and disconnect connector - 2 -.
-
Remove control module - 1 -.
-
Loosen control module from brackets (2x) at nuts (2x) on left and right.
-
Installing
Installation is reverse of removal. When doing so, note the following:
-
Tightening torques for bolts - 2 - : 1.5 Nm