RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1667002.png)
Driveshaft (Audi A4 and Cabriolet, Audi A6), removing
‹› See notes => [ Driveshaft, Assembly Overview ] See: Driveshaft, Assembly Overview
‹› The driveshaft should only be worked on a two column lift.
Audi A4, Audi Cabriolet:
-
Remove rear part of exhaust system from clamping sleeves - arrows -.
-
Pry off mountings - A - for heat shield above intermediate bearing.
