S4 V8-4.2L (BHF) (2004)
/Page-3116002.png)
2 - Lock nut, 40 Nm
3 - Clamp (spring-type)
^
Always replace
4 - Boot
^
Check for damage
^
Must not be twisted after toe setting has been adjusted
^
Can be replaced with steering gear installed
^
Remove tie rods to replace boot
5 - O-ring
^
Always replace
6 - Power steering gear
^
Grease rack with steering gear grease A0F 063 000 04
7 - Clamp (with lug fastener)
^
Always replace
^
Use V.A.G 1275 to tighten
8 - Tie rod, 100 Nm
^
Removing and installing
^
Grease joint with steering gear grease A0F 063 000 04
