S4 V8-4.2L (BHF) (2004)
/Page-2359001.png)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder, Removing and Installing
Clutch master cylinder, removing and installing, 0A3, 6 Spd. M/T AWD
Special tools, testers and auxiliary items required
Hose clamps, up to diameter 25 mm 3094
Pliers VAG 1922
Removing
CAUTION:
^
Follow steps required when disconnecting battery.
^
On vehicles equipped with a telematics system, activate the telematics control module service mode before disconnecting the battery.
-
Pull off rubber seal on plenum chamber in direction of - arrow -.
-
Remove cover - 1 - from plenum chamber.
-
With the ignition switched off, disconnect battery ground (GND) strap.
