S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1559002.png)
‹› Loosen the clamping screw approximately one turn - do not remove it.
‹› Clamping screw is only accessible in selector lever position " D".
‹› Selector lever must remain in position "D" while clamping screw is loose.
-
Loosen quick-release fasteners - 2 - and - 3 - and remove rear noise insulation.
-
Remove tunnel braces..
‹› Do not bend the flex joint in the front exhaust pipe more than 10°, otherwise it will be damaged.
