S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Align drive axle holes and flange shaft/transmission holes with each other, install bolts - 1 - and tighten, (100 mm dia.).
-
Insert cover, install combi-bolts - 2 - and tighten.
-
Install coil spring.
-
Install new collar bolt and tighten to specified torque without turning any farther.
-
Mount wheel and tighten.
-
Lower vehicle onto its wheels.
-
Tighten collar bolt to specified additional turn angle.