S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
‹› Not installed on all versions
10
Securing ring
‹› Always replace
11
Noise insulation
‹› - Arrow - on noise insulation points in direction of travel
12
Shift lever knob
‹› With cover
‹› Removing and installing, refer to => [ Shift Knob with Cover ] See: Shift Knob With Cover
13
Nut - 8 Nm
14
Shift lever support
‹› Removing and installing, refer to => [ Selector Mechanism ] See: Selector Mechanism
15
Bolt, 6 Nm
16
Selector lever
‹› Offset faces toward rear
17
Bolt
18
Nut - 8 Nm
19
Shift housing
‹› Removing and installing, refer to => [ Selector Mechanism ] See: Selector Mechanism
20
Joint piece
‹› For selector rod/shift lever
21
Nut - 10 Nm
‹› Self-locking
‹› Replace
22
Bushing