S4 Quattro Wagon V8-4.2L (BHF) (2008)
Voice Activation Module: Service and Repair
Speech Input Control Module
Speech Input Control Module
-
Turn off all electrical components.
-
Remove ignition key.
Removing
-
Remove right A-pillar trim.
-
Remove right front seat.
‹› Safety belt on seat frame must not be loosened.
-
Fold back the floor mat.
-
Release electronics box cover - arrows - and remove it.
-
Disconnect connector - 2 - on Speech Input Control Module (J507) - 1 -.
-
Remove Speech Input Control Module (J507) - 1 -.
Installing:
-
Install in reverse order.