S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-2057001.png)
Rear Bumper Cover / Fascia: Service and Repair
Bumper Cover Lower Section
Bumper Cover Lower Section
Removing
-
Remove the bolts - 1 - and - 3 - on the bottom part of the bumper cover - 2 -.
-
Unclip the bottom part of the bumper cover - 2 - from the bumper cover - 1 - in the sequence - A to C arrows - beginning above the tail pipe.
Installation
‹› Tightening specifications, refer to => [ Rear Bumper Cover Assembly Overview ] See: Service and Repair.
Installation is reverse of removal, but note the following:
-
When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.
