S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Lightly moisten the seals - D - (contained in the heat exchanger delivery) with coolant (or lightly with silicone grease).
-
Install the new seals - D - on both heat exchanger coolant pipes - E - and - F -.
-
Push the heat exchanger - A - into the A/C unit.
-
Support the heat exchanger - A -, for example, with a plastic wedge - B - on the center tunnel - C - so that it cannot slip down when attaching the
coolant pipes.
-
Install a longer screw - G - (with a M5 thread) all the way to the stop in the bracket - C - as shown in the illustration.