S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Camshaft Clamp (T40070) mounted on both cylinder heads and tightened to 25 Nm - arrows -.
‹› The Camshaft Locating Tool (T40070) is correctly positioned when the holes for the cylinder head bolts remain free.
-
Remove the drain plug - arrow - from the upper part of the oil pan by using a long hex socket wrench with ball head.
-
Install the Crankshaft Holder (3242) in the hole and tighten to 20 Nm. Turn the crankshaft - 1 - back and slightly to completely center the bolt, if
necessary.