S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-599004.png)
6
Camshaft adjuster for intake camshaft
‹› Identification "Intake"
‹› Removing and installing, refer to => [ Camshaft Timing Chains ] See: Camshaft Timing Chains
7
Right camshaft timing chain
‹› Removing and installing => [ Camshaft Timing Chains ] See: Camshaft Timing Chains
8
Right camshaft timing chain tensioner
‹› Removing and installing, refer to => [ Camshaft Timing Chains ] See: Camshaft Timing Chains
9
Guide piece
10
Oil strainer
‹› Set into the chain tensioner
‹› Installation position: Observe locating tabs on circumference
11
Gasket
‹› Replace
‹› Clipped onto the chain tensioner
12
Bolt
‹› Replace
‹› 5 Nm plus and additional 90° turn
13
Thrust washer for drive sprocket
14
Right camshaft timing chain drive sprocket
Installation location of the mounting pins for the right camshaft timing chain drive sprocket
‹› The alignment bushings in the right camshaft timing chain drive sprocket mounting pins - 3 - must engage in the holes in the thrust washer - 1 - and
cylinder block.
2
Right camshaft timing chain drive sprocket
4
Bolt
