S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Slide wheel bearing housing onto drive axle splines.
-
Insert both of upper control arm joint pins - 2 - in wheel bearing housing and insert bolt - 1 -.
-
Remove adhesive residue on ball joint and guide link stub threads.
-
Install guide link on wheel bearing housing and tighten.
-
Install control arm => [ Track Control Arm ] See: Control Arm/Service and Repair/Front Suspension/Track Control Arm.
‹› Push upper control arms down as far as possible while tightening the bolts!