S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Position the clutch module so the thrust pad (VW 510) rests on the support ring - arrow A - in the dual mass flywheel.
-
Place the assembly tool (T10254/3) over the thrust piece (T40171).
-
Press the press straight until the thrust piece - 1 - comes into contact with the dual mass flywheel - 3 - - C arrows -.
A second mechanic is needed for the following step.
-
Install all 6 bolts - 2 - one after another and tighten to the final specification.
-
Release the tension on the press.
-
Install the clutch module => [ Installing ] See: Service and Repair/Removal and Replacement/Clutch Module.