S5 Quattro Coupe V8-4.2L (CAUA) (2009)
/Page-1110001.png)
Pressure Plate: Service and Repair
SAC Pressure Plate with Single Disc Clutch Assembly Overview
SAC Pressure Plate with Single Disc Clutch Assembly Overview
‹› "SAC" stands for "Self-Adjusting Clutch".
‹› Refer to notes => [ Clutch Servicing Information ] See: Service and Repair/Procedures.
‹› To work on clutch, you must remove transmission => [ Transmission, Removing ] See: Manual Transmission/Transaxle/Service and
Repair/Removal and Replacement/Transmission, Removing.
A - Clutch module
‹› Removing and installing => [ Clutch Module ] See: Service and Repair/Removal and Replacement/Clutch Module.
B - Alignment pins
‹› Not equipped on all vehicles
‹› When bolting the clutch module - A - to the drive plate - 1 -, the alignment pins - B - (if applicable) must engage in the alignment bore - C -.
C - Alignment bore
‹› When bolting the clutch module - A - to the drive plate - 1 -, the alignment pins - B - (if applicable) must engage in the alignment bore - C -.
1 - Drive plate
‹› With 8 cylinder engines - 6 holes with threaded sleeves
