S6 V8-4.2L (BBD) (2004)
Instrument Cluster: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer Scan Tool
Erase DTC Memory (function 05)
NOTE: If DTC memory cannot be erased, Check DTC Memory again and repair malfunction.
Requirements
-
DTC memory checked.
-
All malfunctions repaired.
After successful DTC memory check:
Display on VAS5051:
-
In selection -1-, click on the diagnostic function "05 - Check DTC Memory".
Display on VAS5051:
1 -
no indication (before erasing)
or
-
DTC memory erased
NOTE: If indication -1- appears in display field: "DTC memory has not yet been checked", the work sequence was not adhered to correctly. DTC
memory can only be erased if DTC memory was checked before.
2 - Note: Perform the function? Note: Data is being erased!