TT Coupe L4-2.0L Turbo (CCTA) (2008)
/Page-590004.png)
CAUTION!
Risk of damage when installing valve stem seals.
‹› Place plastic sleeve - A - that is attached to valve stem seals - B - on valve stem.
-
Lightly oil valve stem seal.
-
Slide valve shaft seal onto plastic sleeve.
-
Carefully press valve stem seal onto valve guide with Valve Stem Seal Drive (3365).
-
Remove plastic sleeve again.
When the valve keepers were removed from the installation cartridge, they must be inserted in the valve keeper inserting tool ( VAS 5161/18) next.
