TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
^
Remove seal using wedge 3409.
Installing
^
The surface of the piston and seal must only be cleaned with methylated spirits and then dried.
^
Thinly coat piston and seal with fitting paste G 052 150 A2 before inserting.
^
Place protective seal with the outer sealing lip on the piston.
^
Using wedge 3409, insert the inner sealing lip into the groove in the cylinder.
Notes: When doing this hold piston in front of caliper housing.
^
Screw piston into housing by turning knurled wheel clockwise.