TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
/Page-1668003.png)
Notes:
^
Fit special tool 3272 so that the collar (arrow) is before the piston.
^
If piston is difficult to move, use a 13 mm AF open jaw wrench on flats (arrow A) provided for this purpose.
^
If the piston is pushed back with a normal piston reseeing tool or by operating the foot brake the automatic adjustment in the brake caliper is
destroyed.
^
Fit brake pads.
Pre - bleeding brake caliper
^
Open bleed valve - arrow A - and using a standard bleeder bottle, fill with brake fluid until brake fluid flows bubble - free from the threaded hole -
arrow B - (brake hose connection).
^
Close bleed valve.
Notes: Position brake caliper as illustrated to pre - bleed.
