TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
-
Secondary Air Injection (AIR) pump relay -1- (under cover, left at bulkhead) must trigger and the Secondary Air Injection (AIR) pump motor
-V101- must run in intervals. The relay -2- need not be observed in this context (it is involved supplying voltage for the Motronic ECM power
supply relay -J271-)
A -
If relay does not trigger:
-
Check voltage supply of the Secondary Air Injection (AIR) pump relay.
-
Check activation of the Secondary Air Injection (AIR) pump relay.
B -
If relay triggers, but Secondary Air Injection (AIR) pump does not run:
-
Check voltage supply of the Secondary Air Injection (AIR) pump motor.
Checking voltage supply of Secondary Air Injection (AIR) pump relay
-
Switch ignition off.
-
Remove Secondary Air Injection (AIR) pump relay -1-.
-
Connect multimeter for voltage measurement as follows (left relay carrier):
Relay carrier below left cover,
Measure to
at bulkhead