TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-2807001.png)
Seat Heater: Service and Repair
Backrest Heating Element, Removing and Installing
Backrest Heating Element, Removing And Installing
Removing
-
Remove cover and padding from backrest.
-
Disconnect cover from upholstery.
-
Cut wire - 3 - from old backrest heating element - 2 -.
NOTE: The old backrest heating element remains on the upholstery - 1 - and the new backrest heating element is bonded over it.
Installing
-
Align new backrest heating element - 2 - on upholstery - 1 -.
-
Remove protective film and bond new backrest heating element - 2 - to upholstery - 1 - and the old backrest heating element.
CAUTION: Ensure the new seat heating element is bonded so it lines up with the old one.
Further installation is performed in the reverse order of removal.
