TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
^
To guide oil seal extractor, screw securing bolt for camshaft sprocket - arrow - into camshaft as far as it will go (by hand).
^
Unscrew inner part of oil seal extractor 2085 two turns (approximately 3 mm) out of the outer part and lock in position with knurled screw.
^
Lubricate threaded head of oil seal extractor 2085, place it in position, and exerting firm pressure, screw it into oil seal as far as possible.
^
Loosen knurled screw and turn inner part of extractor against camshaft until oil seal has been extracted.
Installing
^
Lightly oil sealing lip of oil seal.
^
Fit guide sleeve 3241/2 onto camshaft journal.
^
Slide oil seal over guide sleeve.
^
Press oil seal in onto stop with press sleeve 3241/1. To do this use bolt 3241/5.