TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Clutch Slave Cylinder: Service and Repair
Slave cylinder (release bearing with hydraulic actuation), removing and installing
Notes: The slave cylinder and the release bearing are a single unit and can only be replaced together.
Removing
-
Remove transmission to work on the slave cylinder.
-
Unscrew bolts - arrows -.
-
Pull out release bearing - A - together with slave cylinder.
Installing
Installation is carried out in the reverse sequence, when doing this note the following:
-
Install transmission.
-
Bleed clutch system.
Tightening torque
Slave cylinder to transmission: 12 Nm