TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-1414002.png)
-
Apply thin coat of assembly paste G 052 150 A2 to piston and protective seal before installing.
-
Insert oil seal in brake caliper housing.
-
Position outer sealing lip on piston.
-
Using Removing wedge VAS 3409, insert the inner sealing lip into the grove in the cylinder.
Note:
^
When doing this hold piston in front of caliper housing.
-
Press piston into the brake caliper housing using piston resetting tool.
Note:
^
The protective seal outer sealing lip will then locate in the piston groove.
