TT Quattro Roadster V6-3.2L (CBRA) (2009)
‹› With cylinder head installed, holes in cylinder head seal are only half visible.
-
Replace timing chain upper cover sealing ring. Refer to => [ Timing Chain Upper Cover Seal ] See: Timing Chain Upper Cover Seal.
-
Check whether fitting sleeves - 2 - and - 3 - are inserted in upper timing chain cover.
-
Insert new sealing ring - 1 - and new seal - 4 -.
-
Lightly coat clean sealing surface - shaded - on timing chain upper cover with sealant.
-
Coat sealing surface below cylinder head seal with some sealant. Do not bend cylinder head seal.
‹› Timing chain upper cover must be installed with 5 minutes of applying sealant.
-
Position upper timing chain cover and tighten. Refer to => [ Upper Timing Chain Cover - Tightening Specifications and Tightening Sequence ]
See: Timing Cover/Service and Repair.