TT Roadster L4-2.0L Turbo (BPY) (2008)
Cowl Moulding / Trim: Service and Repair
Plenum Chamber Cover
Plenum Chamber Cover
1
Hood seal
‹› When installed correctly, seal must lie over plenum chamber cover as shown in the illustration.
2
Plenum chamber cover
‹› Wiper arms removed.
‹› For easier removal/installation, spray windshield edge strip with soapy solution.
‹› Hood seal removed.
‹› Remove trim panel upward diagonally from edge strip beginning at window edge.
CAUTION!
Risk of window breaking during installation
When installing, trim panel must not be driven on.
Carefully press in trim sideways, beginning in edge strip.
3
Molding
‹› For easier removal/installation of plenum chamber cover, spray molding with soapy solution.