TT Roadster L4-2.0L Turbo (BPY) (2008)
Trim Panel: Service and Repair
Roof Frame Trim
Roof Frame Trim
Removing
-
Remove Front Interior Light (W1).
-
Remove sun visors. Refer to => [ Sun Visor Assembly Overview ] See: Service and Repair/Removal and Replacement.
-
Remove bolts - A - and - B - (located in Front Interior Light (W1) opening). Remove buffer - C -.
-
Unclip roof frame trim beginning at rear from A-pillar trim - D - in - direction of arrow -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
First clip front of roof frame trim - 1 - - arrow A - into upper A-pillar trim - 2 - and then tip roof frame trim up.
The roof frame trim must engage with the upper A-pillar trim - arrow B -.
Tightening specifications, refer to => [ Roof Frame Trim Assembly Overview ] See: Service and Repair/Removal and Replacement.