TT Roadster L4-2.0L Turbo (BPY) (2008)
Intercooler: Service and Repair
Charge Air Cooler
Charge Air Cooler
Removing
-
Remove radiator => [ Radiator ] See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Radiator.
-
Remove front bumper cover Removal and Installation.
‹› To prevent damage to condenser and also to the refrigerant lines/hoses, ensure that the lines and hoses are not stretched, kinked or bent.
CAUTION!
The air conditioning refrigerant circuit must not be opened.
-
Remove bolts - arrows - by releasing air ducts at left and right and tipping in direction of headlamps.
-
Tip charge air cooler back slightly at upper edge.
-
Disengage charge air cooler from lower mounting points by raising cooler.
-
Slide charge air cooler in direction of engine.
-
Support charge air cooler from below so that it cannot sink down.
-
Remove bolts - arrows -.