TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-841002.png)
-
Then align bevel box with the remaining 3 holes and secure it with the nut - A -.
-
Place oil collecting and extracting device (VAG 1782) below.
-
Drain axle oil from the bevel box.
-
Bevel box output shaft with stop plate (T10108/1 ), install the 2 M10 x 30 bolts - arrows -.
-
Remove output flange nut with 36 mm socket attachment - A -.
-
Pivot bevel box so that output shaft faces upward.
-
Remove output flange from the bevel box shaft bevel gear with Kukko 45/2 three arm puller - A -.
