TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-841003.png)
‹› When removing output shaft, inner race/tapered roller bearing remains on output shaft and must be removed.
-
Place the thrust piece (40-105) on the output flange.
-
Remove inner race of the tapered roller bearing from the output flange using taper roller bearing puller (VAG 1582) and attachment (VAG
1582/6A).
-
Remove output shaft seal - A -.
-
Clean any remaining locking fluid from the thread on the shaft bevel gear.
