TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-979003.png)
A Three arm puller, e.g. (Kukko 45-2)
‹› When removing output shaft, inner race/tapered roller bearing remains on output shaft and must be removed from it.
-
Place thrust pad (40-105) on output flange.
-
Remove inner race/tapered roller bearing from output flange with tapered roller bearing puller.
‹› You can also use attachment (V.A.G 1582/6A) instead of attachment (V.A.G 1582/6).
-
Remove output shaft seal - A -.
