1 Series E81 120i (N46T) 3-door
Note:
Lug (1) on special tool
11 9 390 must engage in opening (2)
on retaining plate.
Make sure special tool 11 9 390 is secured in retaining plate as
illustrated.
Release screw (1).
Relieve pretension on torsion spring (1) by carefully and slowly
opening pliers on special tool 11 9 390 .
Remove torsion spring (1).
RA Removing and installing/replacing inlet camshaft (N46T)
BMW AG - TIS
20.01.2013 19:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
