1 Series E81 120i (N46T) 3-door
Installation:
If necessary, remove cover.
Tightening torque: 11 51 3AZ
.
Installation:
Keep sealing faces clean and free of oil.
Replace profile seal (1).
If necessary, remove coolant thermostat.
Installation:
Keep sealing faces clean and free of oil.
Replace sealing ring.
Tightening torque: 11 51 5AZ
.
If necessary, remove thermostat housing.
Installation:
Keep sealing faces clean and free of oil.
Replace sealing ring.
Tightening torque: 11 51 4AZ
.
RA Removing and installing/replacing water pump (N46T)
BMW AG - TIS
20.01.2013 19:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -