1 Series E81 120i (N46T) 3-door
Release screws (1).
Tightening torque 24 00 5AZ
.
Remove bracket and heat shield.
Unclip lines (2).
Disconnect plug connector (1).
Disconnect plug connection (4). (120i and 320i only)
Release screws (2).
Remove retaining plate (3).
Tightening torque 24 00 4AZ
.
Note:
Illustration similar
Release screw on right next to cable retaining plate with special
tool 00 9 010 .
Tightening torque, 24 00 1AZ
.
Note:
120i and 320i only
Pull plug (1) out of holder and disconnect.
RA Removing and installing automatic transmission (GA6L45R) N45T, N46T
BMW AG - TIS
20.01.2013 20:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -